The government intends to extend recognition of the CE marking for placing most goods on the market in Great Britain, indefinitely, beyond 31 December 2024. These updates apply to the 18 regulations that fall under the Department for Business and Trade (DBT). These are:
toys
pyrotechnics
recreational craft and personal watercraft
simple pressure vessels
electromagnetic compatibility
non-automatic weighing instruments
measuring instruments
measuring container bottles
lifts
equipment for potentially explosive atmospheres (UKEX)
The government intends to introduce legislation to extend recognition of goods that meet EU requirements, including the CE marking, indefinitely, beyond 31 December 2024 for many products. This will mean that certain goods that meet EU requirements can be placed on the GB market. These updates apply to the 18 regulations that fall under the Department for Business and Trade (DBT).
Manufacturers will have the choice to use either the CE marking or other recognised EU markings (where permitted), or the UKCA marking to supply products to Great Britain in the following areas:
toys
pyrotechnics
recreational craft and personal watercraft
simple pressure vessels
electromagnetic compatibility
non-automatic weighing instruments
measuring instruments
measuring container bottles
lifts
equipment for potentially explosive atmospheres (UKEX)
The UKCA marking is the conformity marking used for products being placed on the market in Great Britain (England, Scotland and Wales). The UKCA regime has been operational since 1 January 2021 and from this date, where a product is covered by the UKCA marking and meets the relevant requirements, you are able to place the UKCA marking on your product and then place the product on the GB market.
The UKCA marking applies to most products for which the CE marking can also be used. It also applies to aerosol dispensers and measuring container bottles for which the reversed epsilon marking can also be used. The technical requirements (sometimes referred to as ‘essential requirements’) you must meet for the UKCA marking will depend on the product specific legislation for your product.
By following designated standards, which the UK introduced to replace EU harmonised standards, there is a statutory ‘presumption of conformity’ that the product meets the essential requirements that apply to that product covered by the standard.
This presumption is rebuttable and, in most cases, using designated standards is voluntary, it is just one way of showing the product meets the essential requirements. In cases where an alternative technical solution is followed, you will have to provide more details in your technical documentation explaining how your products comply with the essential requirements.
For products that can use a UKCA marking in Great Britain, these must meet EU rules in Northern Ireland, including a CE marking. Find out more about placing products on the Northern Ireland market.
The UKCA marking is not recognised on the EU market. Many products need a CE marking to show that they are in conformity with EU rules before they can be supplied on the EU market.
You can check the table below to see which product markings can be used for goods sold on each relevant market under these rules. Please ensure you check the regulations that have specific rules outlined above.
Placing goods on the market in Great Britain or Europe
Type of product
Accepted markings or combination of markings
Manufactured products being placed on the GB market
UKCA or CE
Manufactured products being placed on EU market
CE
Placing qualifying Northern Ireland goods on the market in Great Britain (unfettered access)
Type of good (see list of product areas at the end of this guidance)
Accepted markings or combination of markings
Qualifying Northern Ireland products being placed on the GB market under unfettered access
For the purposes of this table, references to the CE marking may mean that other EU conformity markings apply, if relevant to your product or sector. You can find further information on product markings.
For most manufactured goods, this is the CE marking, but there are some other markings for certain products. These include, but are not limited to, the following:
Please consult the sector specific legislation that applies to your products for more information.
UKCA labelling easement
Legislation is now force which enables the UKCA marking to be placed on a label affixed to the product or on a document accompanying the product until 11pm on 31 December 2027. This measure applies to the following regulations:
Aerosol Dispensers Regulations 2009
Electrical Equipment (Safety) Regulations 2016
Electromagnetic Compatibility Regulations 2016
Explosives Regulations 2014
Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres Regulations 2016
Regulation (EU) 2016/425 and the Personal Protective Equipment (Enforcement) Regulations 2018
Simple Pressure Vessels (Safety) Regulations 2016
Supply of Machinery (Safety) Regulations 2008
The Pressure Equipment (Safety) Regulations 2016
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
Toys (Safety) Regulations 2011
There are specific rules for medical devices, construction products, cableways, transportable pressure equipment, unmanned aircraft systems, rail products and marine equipment.
How to use the UKCA marking
Where to place the UKCA marking
Legislation is now in force which enables the UKCA marking to be placed on a label affixed to the product or on a document accompanying the product until 11pm on 31 December 2027. This means that as of 1 January 2028, in most cases, you must affix the UKCA marking to the product itself or to the packaging.
In some cases, for example, where the product is too small, the UKCA marking can be affixed to the dataplate, packaging, a label affixed to the product or accompanying documentation. Please consult the sector specific legislation that applies to your products for more information.
The UKCA marking must be clearly visible, legible and indelible when you affix it to the product (or permitted alternatives). There are also rules about the size and dimensions of the UKCA marking (see below).
UKCA markings must only be placed on a product by you as the manufacturer, your authorised representative (where permitted in the relevant legislation), or if you are marketing the products under your name or trademark (for example, where you will take the responsibilities of the manufacturer, including affixing the UKCA marking).
When affixing the UKCA marking, you take full responsibility for conformity with the requirements of the relevant UK legislation.
You must not place any marking, sign or inscription which is likely to mislead any other person as to the meaning or form of the UKCA marking or affix any marking which would impair the visibility, legibility and meaning of the UKCA marking.
The UKCA marking cannot be placed on products unless there is a specific requirement to do so in the legislation.
A product may have additional markings and marks, as long as they:
fulfil a different function from that of the UKCA marking or other recognised conformity markings (where permitted)
are not likely to cause confusion with the UKCA marking or other recognised conformity markings (where permitted)
do not reduce the legibility and visibility of the UKCA marking or other recognised conformity markings (where permitted)
Both the CE and UKCA markings can be placed on a product so long as the relevant (EU or GB respectively) rules are met, neither prevents the other being clearly seen and the requirements of both GB and EU legislation are met.
Accompanying documents
What form your accompanying document should take and how long it needs to be kept for depends on the product’s specific circumstances. For example, if a product is transferred in the course of a commercial activity (in a business-to-business or business-to-consumer transaction), the business supplying the product will be obliged to verify that the product bears the UKCA marking, in accordance with the relevant legislation.
It is the responsibility of the manufacturer to ensure that the technical documentation and other records relating to conformity assessment procedures are prepared in (or translated to) English regardless of if the product is UKCA or CE marked. They must also provide (in English) with the product itself or as a batch:
the UKCA marking (if legislation permits the marking to be on an accompanying document)
the UK Declaration of Conformity if UKCA marking the product
the EU Declaration of Conformity if CE marking the product
all relevant product instructions and safety information as the legislation requires
It is the responsibility of the importer to ensure the manufacturer has:
drawn up the relevant technical documentation and instructions for use in English
affixed the relevant conformity marking
fulfilled their identification obligations of including their name and address in line with relevant guidelines
Each individual product will not necessarily need an accompanying document if moving through the supply chain as a batch. For example, when 1,000 units are moving from distributor A to distributor B, one accompanying document should be sufficient, if the information that must accompany the UKCA marking applies to all the units.
However, if distributor B were to then break the units up and supply them to separate distributors C, D, and E, each of these batches would need to be accompanied by the documents outlined above. This principle continues to apply as the units move through the supply chain towards the end user.
Before making a product available, to another distributor or to an end user, the distributor must ensure that:
each product is marked with the UKCA marking (or the UKCA marking is on a label or document accompanying the product, where that is permitted)
the manufacturer and importer have complied with their duties to label the product with their name and contact details
instructions and safety information accompanies the product – they must be in clear, legible and easily understandable English
Rules for using the UKCA image
You must make sure that:
if you reduce or enlarge the size of your marking, the letters forming the UKCA marking must be in proportion to the version set out below
the UKCA marking is at least 5mm in height unless a different minimum dimension is specified in the relevant legislation
the UKCA marking is easily visible, legible and indelible
The UKCA marking can take different forms (for example, the colour does not have to be solid), as long as it remains visible, legible and maintains the required proportions.
