Members Area
     
T: +44 (0)114 551 8170
E: ssas@bssa.org.uk

Category: Trade Names, Proprietary, Non-Stainless Steels (page 1)

Standards, Specifications & Grades

Page 1 of 2

  1. page 2

  1. Common names for chemicals and selection of appropriate stainless steel grades

    Some chemical have both a ‘scientific’ and ‘common’ name, for example caustic soda is the common name for sodium hydroxide. Most corrosion table data uses the scientific names and so finding information can sometimes be difficult when only a common name is known. Reference is also made to alum, aqua fortis, aqua regia, bleach, caustic potash, chromic acid, ethanol and methanol (alcohol), glycol, gypsum, javelle, (javel), water, Labarraque’s solution, marine acid, muriatic acid, oil of vitriol, oleum, rock salt, salt acid, spirit of salt, sulphurated hydrogen and wood acid.

  2. Cutlery stainless steel grades ’18/8′, ’18/10′ and ’18/0′

    The compositions, (chemical analysis), of cutlery and holloware steel types 18/8, (18.8 or 18-8), 18/10, (18.10 or 18-10) and 18/0 are described. The use of these austenitic and ferritic stainless steels for cutlery is briefly outlined and compared to the martensitic stainless steels. LAST UPDATED 1st February 2001

  3. Glossary of stainless steel terms for non-technical users

    This article has a listing of terms often specifically associated with stainless steels, their processing and use. Terms listed include, active, annealing, austenite, austenitising, bright annealing, cathodic protection, chlorides, (halides), cold and hot working, corrosion, creep, deep drawing, duplex, fatigue, (endurance), ferrite, martensite, normalising, passive, passivation, permeability, pH, pickling, pinch pass, pitting, precipitation hardening, scaling temperature, sensitisation, stabilisation, stress relieving, stretch forming and tempering

  4. Non-stainless steel grades – BS 1449-1 strip and BS EN 10083-2 quenched and tempered grades

    This article provides a link to the National Metals Technology Centre, (NAMTEC), for information on non-stainless grades CR34/20, CR37/23, CS4, CS10, CS12, CS17, CS20, CS22, CS30, CS40, CS50, CS60, CS70, CS80, CS95, CS34/20, CS37/23, CS40/30, CS 43/34, CS46/40, CS50/45, CS60/55, CS40F30, CS43F35, CS46F40, CS50F45, CS60F55, HR1, HR2, HR3, HR4, HR14, HR15, HS1, HS2, HS3, HS4, HS10, HS12, HS14, HS15, HS17, HS20, HS22, HS30, HS40, HS50, HS60, HS70, HS80, HS95, C22, C25, C30, C35, C40, C45, C50, C55, C60, 38Cr2, 38CrS2, 46Cr2, 46CrS2, 34Cr4, 34CrS4, 37Cr4, 37CrS4, 41Cr4, 41CrS4, 25CrMo4, 25CrMoS4, 34CrMo4, 34CrMoS442CrMo4, 42CrMoS4, 50CrMo4, 36CrNiMo4, 34CrNiMo6, 30CrNiMo8, 36NiCrMo16, 51CrV4

  5. Non-stainless steel grades – BS 970 and BS 1429 alloy steel grades

    This article provides a link to the National Metals Technology Centre, (NAMTEC), for information on non-stainless grades including 040A04, 040A10, 040A12, 080A15, 080A20, 080M15, 055M15, 060A62, 060A67, 080A67, 060A78, 060A81, 280M01, 708M40, 709M40, 720M32, 722M24, 897M39, 905M39, 045M10, 045A10, 130M15, 125A15, 210M15, 210A15, 214A15, 214M15, 523H15, 523M15, 527H17, 527M17, 527A17, 590H17, 590M17, 590A17, 635H15, 635M15, 635A14, 637H17, 637M17, 637A16, 655H13, 655M13, 665H17, 665M17, 665H20, 665M20, 665H23, 665M23, 708H20, 708M20, 805H17, 805M17, 805A17, 805H20, 805M20, 805A20, 805H22, 805M22, 805A22, 808H17, 808M17, 815H17, 815M17, 820H17, 820M17, 822H17, 822M17, 823H13, 823M13, 835H15, 835M15, 251A58, 251A60, 251H60, 525A58, 525A60, 525H60, 515A61, 685A57, 685H57, 704A60, 704H60, 705A60, 705H60, 735A51, 735H51, 735A54, 805H60, 925A60, 230M07, 216M36, 212A42, 226M44, 080A30, 080M30, 080M40, 080A42, 080A47, 080M50, 070M55, 150M19, 150M36, 045A10, 045M10, 530M40, 605M36, 606M36, 722M24, 817M40, 826M31, 826M40, 945M38, 090A65, 070A72, 060A96, 735A50, 685A55.

  6. Non-stainless steel grades – Emergency number En steel grades

    This article provides a link to the National Metals Technology Centre, (NAMTEC), for information on non-stainless grades including En1, En2, En3, En4, En5, En8, En9, En10, En11, En12, En13, En14, En16, En18, En19, En21, En22, En23, En24, En25, En26, En27, En28, En31, En32, En33, En34, En35, En36, En40, En41, En42, En43, En44, En45, En202, En355.

  7. Non-stainless steel grades – European steel number (EN) grades

    This article provides a link to the National Metals Technology Centre, (NAMTEC), for information on non-stainless grades including 1.0035, 1.0037, 1.0036, 1.0038, 1.0114, 1.0116, 1.0117, 1.0044, 1.0143, 1.0144, 1.0145, 1.0045, 1.0553, 1.0570, 1.0577, 1.0595, 1.0596, 1.0050, 1.0060, 1.0070, 1.0345, 1.0425, 1.0481, 1.0473, 1.5415, 1.7335, 1.7380, 1.7383, 1.0486, 1.0487, 1.0488, 1.1104, 1.0562, 1.0565, 1.0566, 1.1106, 1.8905, 1.8935, 1.8915, 1.8918, 1.6212, 1.6217, 1.6228, 1.5637, 1.5680, 1.5662, 1.5663, 1.8821, 1.8832, 1.8833, 1.8824, 1.8835, 1.8828, 1.8826, 1.8837, 1.8831, 1.8866, 1.8867, 1.8868, 1.8869, 1.8870, 1.8871, 1.8872, 1.8864, 1.8873, 1.8874, 1.8875, 1.8865, 1.8879, 1.8880, 1.8881, 1.8888, 1.0438, 1.0439, 1.1151, 1.1149, 1.1158, 1.1163, 1.1178, 1.1179, 1.1181, 1.1180, 1.1186, 1.1189, 1.1191, 1.1201, 1.1206, 1.1241, 1.1203, 1.1209, 1.1221, 1.1223, 1.1170, 1.7003, 1.7023, 1.7006, 1.7025, 1.7033, 1.7037, 1.7034, 1.7038, 1.7035, 1.7039, 1.7218, 1.7213, 1.7220, 1.7226, 1.7225, 1.7227, 1.7228, 1.6511, 1.6582, 1.6580, 1.6773, 1.8159, 1.0402, 1.0406, 1.0528, 1.0501, 1.0511, 1.0503, 1.0540, 1.0535, 1.0601, 1.5530, 1.5531, 1.5532, 1.7182, 1.7185, 1.7189, 1.0332, 1.0398, 1.0335, 1.0389, 1.0566, 1.8902, 1.8912, 1.8905, 1.8915, 1.8818, 1.8819, 1.8823, 1.8834, 1.8825, 1.8836, 1.8827, 1.8838, 1.0111, 1.0423, 1.0437, 1.0557, 1.8908, 1.8906, 1.8916, 1.8924, 1.8909, 1.8984, 1.8904, 1.8926, 1.8986, 1.8914, 1.8927, 1.8987, 1.8931, 1.8928, 1.8988, 1.8940, 1.8983, 1.8925, 1.8941, 1.8933, 1.8980, 1.8990, 1.8991, 1.8992, 1.8993, 1.8994, 1.8995, 1.8996, 1.8958, 1.8961, 1.8945, 1.8946, 1.8959, 1.8963, 1.8965, 1.8966, 1.8967, 1.0039, 1.0149, 1.0138, 1.0547, 1.0576, 1.0493, 1.0497, 1.0539, 1.0549, 1.8953, 1.8956, 1.8843, 1.8844, 1.8845, 1.8846, 1.8847, 1.8848, 1.8849, 1.8850, 1.0493, 1.0497, 1.0539, 1.0549, 1.8953, 1.8956.

  8. Non-stainless steel grades – pressure purposes alloy steel grades

    This article provides a link to the National Metals Technology Centre, (NAMTEC), for information on non-stainless grades including P235GH, P265GH, P295GH, P355GH, P275N, P275NH, P275NL1, P275NL2, P355M, P355ML1, P355ML2, P355N, P355NH, P355NL1, P355NL2, P355Q, P355QH, P355QL1, P355QL2, P420M, P420ML1, P420ML2, P460M, P460ML1, P460ML2, P460N, P460NH, P460NL1, P460NL2, P460Q, P460QH, P460QL1, P460QL2, P500Q, P500QH, P500QL1, P500QL2, P690Q, P690QH, P690QL1, P690QL2, 16Mo3, 13CrMo4-5, 10CrMo9-10, 11CrMo9-10, 11MNNi5-3, 13MnNi6-3, 15NiMn6, 12Ni14, 12Ni19, X8Ni9, X7Ni9, 161-360, 161-400, 161-430, 271, 281, 621, 660.

  9. Non-stainless steel grades – SAE (Society of Automotive Engineers) AISI alloy steel grades

    This article provides a link to the National Metals Technology Centre, (NAMTEC), for information on non-stainless grades including 1330, 1335, 1340, 1345, 4023, 4024, 4027, 4028, 4032, 4037, 4042, 4047, 4118, 4130, 4135, 4137, 4140, 4142, 4145, 4147, 4150, 4161, 4320, 4340, 4422, 4427, 4615, 4617, 4620, 4626, 4718, 4720, 4815, 4817, 4820, 50B40, 50B44, 5046, 50B46, 50B50, 5060, 50B60, 5115, 5117, 5120, 5130, 5132, 5135, 5140, 5147, 5150, 5155, 5160, 51B60, 50100, 51100, 52100, 6118, 6150, 8115, 81B45, 5615, 8617, 8620, 8622, 8625, 8627, 8630, 8637, 8640, 8642, 8645, 86B45, 8650, 8655, 866, 8720, 8740, 8742, 8822, 9254, 9260, 9310, 94B15, 94B17, 94B30, 1330H, 1335H, 1340H, 1345H, 4027H, 4028H, 4032H, 4037H, 4042H, 4047H, 4118H, 4130H, 4135H, 4137H, 4140H, 4142H, 4145H, 4147H, 4145H, 4161H, 4320H, 4340H, E4340H, 4620H, 4718H, 4720H, 4815H, 4817H, 4820H, 5046H, 5120H, 5130H, 5132H, 5135H, 5140H, 5147H, 5150H, 5155H, 5160H, 6118H, 6150H, 8617H, 8620H, 8622H, 8625H, 8627H, 8630H, 8637H, 8640H, 8642H, 8645H, 8650H, 8655H, 8660H, 8720H, 8740H, 8822H, 9260H, 9310H.

  10. Non-stainless steel grades – structural alloy steel grades

    This article provides a link to the National Metals Technology Centre, (NAMTEC), for information on non-stainless grades including BS4360 grades 40A, 40B, 40C, 40D, 40E, 43A, 43B, 43C, 43D, 43E, 43EE, 50A, 50B, 50C, 50D, 50E, 50EE, 55C, 55EE, 55F, WR50A, WR50B, WR50C and EN 10025 grades S185, S235, S235JR, S235JRG, S235JRG2, S235LO, S235J2G3, S235J2G4, S275, S275JR, S275JO, S275J2G3, S275J2G4, S355, S355JR, S355JO, S355J2G3, S355J2G4, S355K2G3, S355K2G4, E295, E 335, E360, German steel grades such as St 28, St 34-2, St 35, St 35.8, St 37.0, St 37-2St 37-3, St37.4, St 44-2, St 44.0, St 44.4, St 45, St 50-2, St 52, St 60-2 and Japanese steel grades, including SS34, SS41, SS50, SS55, SS330, SS400, SS490, SS540 are also structural grades

Page 1 of 2

  1. 1
  2. page 2

← Back to previous

↑ Top