-
BS EN 10253-3 and 10253-4 are the EN standards for austenitic and duplex stainless steel butt-welding pipe fittings without and with specific inspection requirements. This article summarises the mechanical properties
-
The BS EN 10088-3 standard gives the mechanical properties for stainless steel semi-finished products, bars, rods and sections for general purposes. The properties given in this article are proof strength, tensile strength, elongation and hardness of austenitic stainless steels.
-
The BS EN 10088-3 standard gives the mechanical properties for stainless steel semi-finished products, bars, rods and sections for general purposes. The properties given in this article are proof strength, tensile strength, elongation and hardness of austenitic stainless steels.
-
The BS EN 10088-3 standard gives the mechanical properties for stainless steel semi-finished products, bars, rods and sections for general purposes. The properties given in this article are proof strength, tensile strength, elongation and hardness of austenitic-ferritic stainless steels.
-
The BS EN 10088-3 standard gives the mechanical properties for austenitic-ferritic, (duplex), stainless steel semi-finished products, bars, rods and sections for general purposes. The properties given are proof strength, tensile strength, elongation and hardness.
-
The BS EN 10088-3 standard gives the mechanical properties for ferritic stainless steel semi-finished products, bars, rods, wires, sections for general purposes. The current edition was published in October 2014. The properties given are proof strength, tensile strength, elongation and hardness for Bright Bars.
-
The BS EN 10088-3 standard gives the mechanical properties for ferritic stainless steel semi-finished products, bars, rods, wires, sections for general purposes. The current edition was published in November 2014. The properties given are proof strength, tensile strength, elongation and hardness. LAST UPDATED 1st DECEMBER 2014.
-
BS EN 10095 is the material standard for heat resisting steels and nickel alloys. Mechanical properties, (proof strength, tensile strength, hardness and elongation), of the common grades of stainless steel at ambient temperature covered in the standard are listed. Ferritic, austenitic and austenitic-ferritic, (duplex), grades are included.
-
The BS EN 10088-3 standard gives the mechanical properties for stainless steel semi-finished products, bars, rods and sections for general purposes. The properties given in this article are proof strength, tensile strength, elongation and hardness of martensitic and precipitation hardening stainless steels.
-
The BS EN 10088-3 standard gives the mechanical properties for martensitic and precipitation hardening stainless steel semi-finished products, bars, rods and sections for general purposes. The properties given are proof strength, tensile strength, elongation and hardness.
