British standards for the welding and fabrication of stainless steels
Introduction
The table shows both current and obsolete standards (where these may be of current interest) in the ‘Status’ column. ‘C’ is current and ‘W’ is withdrawn.
The ‘date’ is the original publication year.
Use the ‘Ctrl’ and ‘F’ keys to ‘find’ the standard you are looking for.
These lists cannot be guaranteed as complete and accurate by the BSSA.
In cases of doubt the catalogues maintained by the British Standards Institution should be used.
Table
| Std Number |
Date |
Status |
Title |
| BS 2633 |
1987 |
C |
Specification for Class I Arc Welding of Ferritic Steel Pipework for Carrying Fluids |
| BS 4677 |
1984 |
C |
Specification for Arc Welding of Austenitic Stainless Steel Pipework for Carrying Fluids |
| BS 4515-2 |
1999 |
C |
Specification for Welding of Steel Pipelines on Land And Offshore – Duplex Stainless Steel Pipelines |
| BS 7475 |
1991 |
W |
Specification for Fusion Welding of Austenitic Stainless Steels |
| BS EN 1011-3 |
2018 |
C |
Welding-Recommendations for Welding of Metallic Materials – Part 3: Arc Welding of Stainless Steels |
| BS EN 1600 |
1997 |
W |
Covered Electrodes for Manual Metal Arc Welding of Stainless and Heat Resisting Steels |
| BS EN ISO 3581 |
2016 |
C |
Welding Consumables. Covered Electrodes for Manual Metal Arc Welding of Stainless and Heat Resisting Steels |
| BS EN 12072 |
2000 |
W |
Welding Consumables-Wire Electrodes, Wires and Rods for Arc Welding of Stainless and Heat-Resisting Steels – Classification |
| BS EN ISO 14343 |
2017 |
C |
Welding Consumables. Wire Electrodes, Strip Electrodes, Wires and Rods for Arc Welding of Stainless and Heat-Resisting Steels – Classification |
| BS EN 12073 |
2000 |
W |
Tubular cored electrodes for metal arc welding, with or without a gas shield, of stainless and heat resisting steels – Classification. |
| BS EN ISO 17633 |
2010 |
C |
Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels |
| BS EN 760 |
1996 |
C |
Welding Consumables-Fluxes for Submerged Arc Welding – Classification |
| BS EN 287-1 |
2011 |
C |
Qualification test of welders. Fusion welding. Steels |
| BS EN 288 |
1992
1992
1992
1995
1995 |
C |
Specification and Approval of welding Procedures for Metallic Materials
Part 1. Welding Procedure Tests for the Arc Welding of Steels
Part 2. Welding Procedure Specification for Arc Welding
Part 3. Welding Procedure Tests for the Arc Welding of Steels
Part 5. Approval by Using Approved Welding Consumables for Arc Welding
Part 6. Approval Related to Previous Experience
Part 7. Approval by a Standard Welding Procedure for Arc Welding |
| BS 6787 |
1989 |
C |
Method for Determination of Ferrite Number in Austenitic Weld Metal Deposited by Covered Cr-Ni Steel Electrodes |
| BS 5245 |
1975 |
C |
Specification for Phosphoric Acid Based Flux for Soft Soldered Joints in Stainless Steel |
| BS EN ISO 3506 |
2009 |
C |
Mechanical Properties of Corrosion Resistant Stainless Steel Fasteners |
| BS 6105 |
1981 |
W |
Specification for Corrosion Resistant Fasteners |
| BS 1210 |
1963 |
C |
Specification for Wood Screws |
← Back to previous
↑ Top
