6e. European EN Standard Grade Summary

Introduction

There are now a large number of EN standards for stainless steel products. It is not always easy to know which grades belong to which standard. You can of course look through the summary of each one on this website. However, this can be quite time consuming. This article is designed to provide a quick guide to check which standard a particular grade appears in.

Standards Covered

Whilst not an exhaustive list, the most common EN standards and a few which are quite specialised are covered.

To go immediately to the Summary click here. This opens up a spreadsheet. The spreadsheet allows you to sort the list of grades in numerical order or by type. If you use this facility you will get a Security warning about Macros. Choose the option Enable Macros. The spreadsheet also contains cross references between the EN numbering system and the AISI system or generic/brand names.

To access a more complete summary of grades and properties click on the appropriate link below:

Standard	Description	Links
EN 10088-2	Flat Products	Compositions Mechanical Properties Austenitic Mechanical Properties Ferritic Mechanical Properties Martensitic Mechanical Properties Duplex Mechanical Properties Precipitation Hardening
EN 10088-3	Long Products	Compositions Mechanical Properties Austenitic Mechanical Properties Ferritic Mechanical Properties Martensitic and PH Mechanical Properties Duplex
EN 10028-7	Flat Products for Pressure Purposes	Elevated Temperature Properties
EN 10272	Long Products for Pressure Purposes	Elevated Temperature and Sub zero Properties
EN 10095	Heat Resisting	Compositions Mechanical Properties
EN 10302	Creep Resisting	Compositions Mechanical Properties
EN 10296-2	Welded Tubes	Compositions Mechanical Properties
EN 10297-2	Seamless Tubes	Compositions Mechanical Properties
EN 10217-7	Welded Tubes for Pressure Purposes	Compositions Mechanical Properties
EN 10216-5	Seamless Tube for Pressure Purposes	Compositions
EN 10253-3	Butt-weld pipe fittings without specific inspection requirements	Compositions Mechanical Properties
EN 10253-4	Butt-weld pipe fittings with specific inspection requirements	Compositions Mechanical Properties
EN 10312	Welded Tubes for Water
EN 10151	Strip for Springs	Compositions and Properties
EN 10270-3	Wire for Springs	Compositions and Properties
EN 10269	High and Low Temperature Fasteners	Compositions Mechanical Properties
EN 10264-4	Wire for Rope
EN 10263-5	Long Products for Cold Extrusion
EN 10222-5	Forgings for Pressure Purposes
EN 10250-4	Open Die Forgings
EN 10283	Castings	Compositions

← Back to previous

↑ Top

6e. European EN Standard Grade Summary

Introduction

Standards Covered

CONTACT