Members Area
T: +44 (0)114 551 8170
E: ssas@bssa.org.uk

6e. European EN Standard Grade Summary

Introduction

There are now a large number of EN standards for stainless steel products. It is not always easy to know which grades belong to which standard. You can of course look through the summary of each one on this website. However, this can be quite time consuming. This article is designed to provide a quick guide to check which standard a particular grade appears in.

Standards Covered

Whilst not an exhaustive list, the most common EN standards and a few which are quite specialised are covered.

To go immediately to the Summary click here. This opens up a spreadsheet. The spreadsheet allows you to sort the list of grades in numerical order or by type. If you use this facility you will get a Security warning about Macros. Choose the option Enable Macros. The spreadsheet also contains cross references between the EN numbering system and the AISI system or generic/brand names.

To access a more complete summary of grades and properties click on the appropriate link below:

Standard Description Links
EN 10088-2 Flat Products Compositions

Mechanical Properties Austenitic

Mechanical Properties Ferritic

Mechanical Properties Martensitic

Mechanical Properties Duplex

Mechanical Properties Precipitation Hardening

EN 10088-3 Long Products Compositions

Mechanical Properties Austenitic

Mechanical Properties Ferritic

Mechanical Properties Martensitic and PH

Mechanical Properties Duplex

EN 10028-7 Flat Products for Pressure Purposes Elevated Temperature Properties
EN 10272 Long Products for Pressure Purposes Elevated Temperature and Sub zero Properties
EN 10095 Heat Resisting Compositions

Mechanical Properties

EN 10302 Creep Resisting Compositions

Mechanical Properties

EN 10296-2 Welded Tubes Compositions

Mechanical Properties

EN 10297-2 Seamless Tubes Compositions

Mechanical Properties

EN 10217-7 Welded Tubes for Pressure Purposes Compositions

Mechanical Properties

EN 10216-5 Seamless Tube for Pressure Purposes Compositions
EN 10253-3 Butt-weld pipe fittings without specific inspection requirements Compositions

Mechanical Properties

EN 10253-4 Butt-weld pipe fittings with specific inspection requirements Compositions

Mechanical Properties

EN 10312 Welded Tubes for Water
EN 10151 Strip for Springs Compositions and Properties
EN 10270-3 Wire for Springs Compositions and Properties
EN 10269 High and Low Temperature Fasteners Compositions

Mechanical Properties

EN 10264-4 Wire for Rope
EN 10263-5 Long Products for Cold Extrusion
EN 10222-5 Forgings for Pressure Purposes
EN 10250-4 Open Die Forgings
EN 10283 Castings Compositions

← Back to previous

↑ Top